If you’re considering installing a split AC unit in your home, you should follow several important guidelines to make the installation go smoothly. The first of these guidelines is to place the indoor unit on a wall that can handle the team’s weight. Ideally, it would help if you chose a flat, stable wall that can support the unit’s weight. If you decide to install your split AC indoors, consider these seven tips.
An air conditioner should be installed on a wall that can easily take its weight.
Before installing an air conditioner, ensure that you have prepared the wall where it will be installed. You will need an electrical outlet to power it. Locate the switch that controls electricity and shut it off before cutting the wall. You will need to draw a guide through the wall studs. Once you have traced the outline, you will need to cut the wall studs through which the air conditioner will be mounted. After cutting through the studs, you should make another outline that is 2.5 inches larger than the first one. The second outline will serve as a frame for the AC.
If the wall has a thickness of at least three inches, installing a wall air conditioner is safe. Ensure it is not placed near antennas or power lines, as this can cause problems with electrical noise. Also, avoid areas susceptible to sulfur, oil, or gas leaks. Almost all air conditioners come with remote controls. The remote control will allow you to change the temperature of the air conditioner without opening the unit.
It should be installed on a flat and rigid surface.
The outdoor unit of a split AC should be placed on a flat, rigid surface away from water and direct sunlight. The unit’s components are delicate, and improper placement can cause excessive vibration that can damage the condenser, copper pipes, or other parts. It can also increase the cooling load and heat effect of the room. In addition, improper placement can cause noise. It is best to hire a professional to install your AC, if possible.
The indoor unit of a split AC should be installed at seven to eight feet above the floor to ensure adequate cooling and even air circulation. It is also wise to choose aluminum brackets with a tilt angle so that the condensed water flows unobstructed. This provides an even distribution of the coolant throughout the room. A flat and rigid surface is also essential to ensure that the outdoor and indoor units fit tightly together.
It should be installed on a wall that can easily take its weight.
If you are planning to install a split AC in your house, select a wall with adequate strength and a proper height. The unit should be placed on a wall away from direct sunlight, and 15 centimeters should be available on all sides. The interior wall should also be able to support the system’s weight, or you can build an additional frame on top of the wall. If the wall is not strong enough, you may hire an engineer to help you mount the unit. He will then install the team on the wall and will measure the height of the wall. Once he has measured the wall, he will attach the mounting plate with screws.
The distance between the outdoor and indoor unit is another crucial factor. This is important for the cooling of the team. If the outdoor unit is too far away from the indoor unit, it can prevent the condensed water from discharging heat into the room. This can lead to higher operating costs and damage to the compressor. If you are installing a split AC in an open space, make sure you place the outdoor unit in an open area to allow heat dissipation from the condenser.